2000W Heat Gun Electric Hot Air Gun Dual Temperature LCD Display With 4 Nozzles

Description

2000W Heat Gun Hot Air Dual Temperature w/ 4 Nozzles Strong Power Heatgun Tool
21.96 USD
24.95 USD
Free shipping
12%
off
Product Description
2000W Hot Air Heat Gun Dual Temperature Power Tool with 4 Nozzles LCD Digital Display Variable Temperature Control
Note:
Please don't directly shut down the power while the heat gun working in high temperature.
Please adjust the temperature back to the lowest, blow off the residual temperature then shut down. It can extend the service life.
Description:
【STRONG POWER DUAL HEATING CORE】
: 2000W heat gun provides strong power quickly heat up to 1112℉(600℃) . Our hot air gun use dual heating core, which is twice the life of ordinary heating wire. Heat up faster and high-performance copper winding motor inside the hot air gun gives strong power to make your heating job efficient.
【VARIABLE TEMP CONTROL 】
: Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 60 ℃-600 ℃(140℉~1112℉).
【OVERLOAD PROTECTION】:
The high quality stainless steel outlet of the heat gun has high temperature resistance. The anti-scald cover is made of flame-retardant material with high melting point and slow heat conduction. Our heat gun also possess overload protector to avoid damaging your heat gun and circuit in extreme high temperature environment.
【ERGONOMIC DESIGN】:
Heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.
Features:
---2000W heat gun provides strong power quickly heat up to 1112℉(600℃) in seconds. Professional heat gun gives outstanding performance.
---Variable Temperature Control
---Two modes: I: 400℃, 250L/min; II: 600℃, 500L/min
---Designed with dual heating wire for rapid heating, the integrated overload protection function can block the heating element and prevent burning;
---The heat gun have LCD display that allows user to adjust temperature , precisely control the Tempe..
---Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles,loosening rusted bolts, and other heating or thawing purpose etc.
Four Nozzles：
Deflector nozzle directs a long, narrow heat pattern to the work surface;
Two concentrator nozzles direct a concentrated heat flow to the work surface;
Reflector nozzle disperses heat flow evenly around the whole work surface
Specifications:
Main material: metal+plastics
Voltage: AC110V, 50Hz
Power: 2000W
Lowest Temperature: 60℃-400°C(140℉-752°F)
Highest temperature :60°C-600℃(140°F-1112℉)
Air volume: 350L/min, 500L/min (adjustable)
Package include:
1 x Heat Gun
4 x Nozzles
1 x User Manual
Advantages：
1. Grille-type air outlet design, uniform and powerful air supply
2. Double heating wire, overload protection, fast heating, not afraid of overload
3. PP+GF30 king body shell, more heat insulation, anti-drop and anti-scratch
4. Two-speed wind speed adjustment switch and stepless temperature adjustment knob design, adjust the temperature according to your own needs
5.365 high-power pure copper motor, uniform and stable operation, longer service life
Precautions for safe operation
1. Please connect the power according to the voltage marked on the tool.
2. Be sure to hold the tool tightly at all times when using the tool at high places.
3. Do not place the tool until the tool has completely stopped.
Heat gun safety precautions
1. Do not use the heat gun as a hair dryer.
2. Do not point the hot air blower directly at people or animals.
3. Do not use it near flammable materials or flammable gases.
4. Do not block or cover the hot air inlet and outlet. two!
5. When the hot air is in use or just after use, do not touch the nozzle. The handle of the hot air gun must be protected.
Keep dry.
6. The heat gun should be completely cooled before it can be stored.
Maintenance and Repair
Do not use turpentine, paint mixture, gasoline or similar substances to clean up.
1. When you stop working, please lower the temperature slowly, blow out all the hot air in the air duct, and then turn it off.
Turn off the switch and turn the hot air cylinder vertically upside down on a flat work surface.
2. When storing the hot air duct, please confirm that the hot air duct is completely cooled.
3. Always remove the dirt accumulated at the inlet and outlet, and keep the inlet and outlet clean.
4. Check all extended insulated wires, if damaged, replace them immediately, do not use damaged insulated wires
cords, as it may cause injury from electric shock if touched.
5. All repairs must be done by an authorized service center or other qualified service organization to ensure safety.
integrity and reliability.
Payment
Delivery details
Terms of sales
About us
Contact us
Returns
We accept PayPal only.
Please contact us if you have any problem with Payment.
We will ship the package within 3 Business day.
All the package ship from our US Warehouse.
1. If you have any issue with the transaction, please contact us via eBay message before opening eBay/PayPal case.
2. We will leave POSITVE FEEDBACK after receiving the payment. Please be sure to contact us if you are not satisfied with the item before leaving FeedBack.
3. We are not responsible for any custom duty or import tax.
1.We are TX vendor in USA. All the item will be dispatch from US warehouse.
2. We are salling the best price products and best service!
3. Office Time: Monday to Saturday 9:00~18:00 (UTC+8)
Please contact us via eBay message.
We will respond your message within 24 hours on business days.
1. We accept return within 30 days since buyer receiving the item.
2. Please write us via eBay message about the return information, pleaes don't file RETURN case before contact us.
3. Item must be returned in original package at good condition.
Payment
We accept PayPal only.
Please contact us if you have any problem with Payment.
Delivery details
We will ship the package within 3 Business day.
All the package ship from our US Warehouse.
Terms of sales
1. If you have any issue with the transaction, please contact us via eBay message before opening eBay/PayPal case.
2. We will leave POSITVE FEEDBACK after receiving the payment. Please be sure to contact us if you are not satisfied with the item before leaving FeedBack.
3. We are not responsible for any custom duty or import tax.
About us
1.We are TX vendor in USA. All the item will be dispatch from US warehouse.
2. We are salling the best price products and best service!
3. Office Time: Monday to Saturday 9:00~18:00 (UTC+8)
Contact us
Please contact us via eBay message.
We will respond your message within 24 hours on business days.
Returns
1. We accept return within 30 days since buyer receiving the item.
2. Please write us via eBay message about the return information, pleaes don't file RETURN case before contact us.
3. Item must be returned in original package at good condition.
powered by