Mini Portable Heat Gun For Heat Shrink Tubings Home Power Equipment 110v 300w

Description

Mini Portable Heat Gun
For
Heat Shrink Tubing Home Power Equipment 110v 300w
Specification
Color: White
Material: ABS
Size: 9*1.7-in, wire length: 39-in
Type: Constant temperature
Working temperature: 200 Celsius
Rated power: 300 W
Power type: AC power supply
Rated voltage:110 v
Power: 50-60 Hz
Working Time: 8 minutes
Description:
The mini heat gun is made of high-quality ABS plastic exterior
and stainless-steel inside, portable, simple and durable.
Product dimension: 9-in x 1.7-in.
The wire length of the heat shrink gun is 39-in.
Built in a heat sink makes
the internal temperature of the hot air gun is reduced and life is prolonged.
The portable hot air gun heats up in seconds and quickly gets hot temperature up to 200 Celsius/390 Fahrenheit.
Please DO NOT make it work more than 8 minutes in one time, also please DO NOT get too close to the material.
APPLICATION heat shrink gun Comes with an additional replaceable protecting cap, it's great for rubber stamp, embossed powder, heat shrinkable film, heat shrink
tubing and
drying paint, etc.
Usage:
Plug in the heat tool.
Hold the gun but do not Press the hot nozzle.
Keep a distance of 3-5 cm from the vent, heating at an angle of about 45 degrees
until the completion of the work.
Turn off the power to stay cooling.
Notes:
This kind of gun cannot adjust the temperature
but it heats up quickly at about 200 Celsius theoretically.
Therefore, do not blow your Polymer Clay Works at
one position for a long time to prevent distortion.
This heat gun is not a High Power one due to its 300 W low power.
But it is great for heating shrinkable film, embossed powder, rubber stamp,
the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing Includes:
1 x Heat Gun