Pistola De Aire Caliente Calor Alta Potencia Para Manualidades Celulares 1800W

Description

►【Strong Power With 2 Modes】 SEEKONE heat gun provides strong power to quickly heat up in seconds.The 1800W motor generates enough hot air for almost any project, there are two modes: I: 400℃, 250L/min; II: 600℃, 500L/min.
►【High and Low Temperature Settings】 You can switch the temperature between the low setting of 752℉(400℃）and high of 1112℉ (600℃） with a single push of a button to easily help complete household home improvement tasks. Dual temperature option to meet different needs in your project.
▶ 【Scientific Ergonomic Design & Wide Applications】SEEKONE heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries.Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
►【Four Nozzles Accessories】Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface. (Note: The heat blown out is highly concentrated,Don't use the nozzle for a long time.)
▶【What You Get 】 1 x 1800W Heat Gun, 4 x Nozzles, 1 x User Manual, our worry-free and friendly customer service. Anything happened about the product, please feel free to at any time, we will be always here for you.
kaparon eBay store
Product Description
What You Get
1 x 1800W Heat Gun
4 x Nozzles
1 x User Manual
Note：
When the internal temperature of the heat gun is too high,the heat gun will start the overheat protection mode, automatically stopping the heating and restarting the heating when temperature returns normal.
The heating coil will glow, and may emit some smoke, this is because the new coil has a thin coating of antirust, and smoke will dissipate quickly. After using several times, the front tube will become darker, which is normal due to the high cycles.
Specification
Strong power: 1800W
Input: 110V, 50Hz
Dual Temperature Setting : 400℃(752℉)/ 600℃(1112℉)
Dual Airflow Setting: Low: 250L/min High: 500L/min
Cable Length :1.4m (4.6ft)
Weight: 0.9kg (1.984lb)
Bending Pipes
Using the heat gun you can bend a piece of PVC pipe at just about any angle without using any adhesives or elbow joints. Not only convenient but also dramatically speeds up the job.
Removing Rusted Bolts
Heat the nut with a heat gun if it won't come off. This causes the steel to expand, which can break the rust seal. Apply heat for about a minute, then allow the nut to cool.
Floor Tile
You can use the heat gun to remove glued floor tiles, just apply heat to the tiles to soften the glue underneath. Then pry the tile to produce a gap. Be sure to move the heat gun back and forth to prevent localized overheating.
Shrink Packaging Film
It's an practical tool that every mechanic should have in their tool box. You can use this heat gun to shrink the film easily. Start from a distance and gradually move closer to the contracting film until the desired effect is achieved.
Kindly note:
If you would like to order more quantity than shown is available, you are welcome to place one order fox maximum available quantity and place one more order again because we always have more, than shows in available items.
Regards