Seco-Larm Enforcer No Touch Request-to-Exit Sensor, English [SD-927PKC-NEQ]

Description

Seco-Larm Enforcer No Touch Request-to-Exit Sensor
English Version
SD-927PKC-NEQ
The
ENFORCER
"No Touch" Request-To-Exit Sensor Plates use IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it requires no touch, this wall plate sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
Features:
No Touch -- just wave a hand in front of sensor.
Sensing range up to 4" (10cm). (Range for SD-927PWCQ is up to 2" (5 cm))
Reliable IR technology senses motion.
No touch reduces the risk of cross-contamination.
Stainless steel or white plastic single gang plate.
3A relay, triggers min. 0.5 sec. or as long as hand is near the sensor.
LED illuminated sensor area for easy identification.
LED changes color to show the relay is triggered.
Quick-connect screw-less terminal block.
Specifications:
Current Draw: 40mA@12VDC
Operating Voltage: 12VDC
Relay Type: Form C (NO/NC/COM)
Switching capacity (3A@24VDC)
Response Time: 10mS
LEDs: Standby: Green
Triggered: Red
Output Time: .5S or as long as unit is triggered
Range: Up to 4” (10cm)
Operating Temperature: -4°~131° F (-20°~55° C)
Weight: 3oz (85g)
Dimensions: 41/2"x23/4"x15/16" (115x70x33.5mm)