SIEMENS NEW 547-323B | RCM FM BAC +/-.25"WC(62.5PA).25%FS | room pressure sensor

Description

Details for 547-323B
Siemens part#:
547-323B
RCM FM BAC +/-.25"wc(62.5Pa).25%FS
Fire retardant plastic UL94 V-0
Removable terminal block
Barbed fittings for 1/4 tubing
Mounts to triple gang, double-deep electrical box
Technical Data
Dimensions:
5.84 H x 7.45 W x 0.38 D (14.84 cm x 18.92 cm x 0.95m)
Weight:
1 lb 3.2 oz (554 grams)
Power:
Operating Range: 18 to 32 VACbr />     Consumption: 10W maximum, 3 W typical
BACnet MS/TP (9600, 19200, 38400, 7680 Baud Rates)
1 internal pressure sensor
2 A/D's inputs for remote pressure sensors, temperature or humidity sensors (Resolution 16-bit)
Door contact dedicated
DESCRIPTION
In a hospital, laboratory, or animal research facility, the integrity of the ventilation control system is at the heart of a contaminant-free environment. Whether a room is to be maintained at a negative pressure to prevent contaminants from escaping into adjacent areas or positive pressure to protect patients with compromised immune systems, the proper pressurization of the room is essential. To assure proper pressurization is maintained in these critical environments, a room pressure monitor is employed to measure and alert staff and personnel of any change in pressure—no matter how small. A fail-safe solution to monitoring these very low pressure changes is the Model SRCM Room Condition Monitor, which uses highly accurate capacitance sensing technology to measure and display true low pressure differential to a resolution of 0.00001. in water column (WC).
FEATURES
High resolution color touch-screen display
Immediate feedback on room status
Intuitive graphic interface
"Two-in-One" eliminates the need for a second
monitor
Display both pressure and room condition
On-board and remote sensing capability
Flush-mount design
Low profile, easy-care wipe down
Snap-in cover plate—no visible fasteners
Face is sealed for cleaning or wipe-down
True pressure measurement
High accuracy low differential capacitance
technology
Dead ended solution—no contamination or
clogging
Standard on-board sensor and optional remote
sensor—"two measurements in one"
Pressure ranges between +- 0.05" WC and
+/- 5.00" WC
Clone configuration capability
Standard off-the-shelf electrical box
Ease of installation
Mounts in off-the-shelf electrical gang box
Four-screw, self-leveling mount
Labeled, removable termination strips—ease of
wiring
Clone configuration
Cloning of configurations for multiple unit
installation using USB port
Multiple Communications Options
BACnet MSTP
Siemens P1
Alarm capabilities
Local audible and visual alarming
Remote annunciator alarming capability
Alarm delay feature—prevent nuisance alarms
Multiple Room Support
The SRCM can be used to display the status of
two rooms.
Second pressure sensor is required