Two Door Visionis Access Control with Maglock 600lbs Wireless Receiver Remote

Description

Two Door Visionis Access Control with Maglock 600lbs Wireless Receiver Remote
PACKAGE INCLUDES:
(2) VIS-ML600LED: 600lb indoor Electric Lock with LED Sensor
(1) VIS-8007: 2-Channel Receiver 315mhz
(2) VIS-8008: 2 button Fixed Code Transmitter, Pre-coded Wireless Remote
(3) VISCP100: 12v 1000ma Power supply
(2) VIS-7000: Request-To-Exit Plate Illuminated Square Push button
FOR INSWINGING DOORS, YOU WILL NEED TO PURCHASE THE INSWINGING BRACKET FOR EACH LOCK
DESCRIPTION:
The KT14-05 kit is a two door 600lbs Maglock Buzz-in kit for doors that opens out. It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the wireless RF remote, the VIS-8008.
The remote communicates with the wireless receiver, which can program up to 50 remotes, and it has a range of 300 feet. There are two main features on the receiver that will allow you to program the wireless receiver in two different ways. The default function of the receiver is that when the power is on, the mag lock of your kit is locked and when you press the remote the maglock will unlock temporarily to open the door. The other function that the receiver has is the ON/Off feature. This feature is very similar to a light switch; when you program this option you would press the remote once and the door will unlock and remain unlocked until you press the button again. When you press the remote again, the door will then lock.
This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door. Keep in mind that this exit button does not bring a delay meaning that you would have to press the exit button at the same time that you open the door.The remotes include two buttons that will allow you to control two doors.
This kit has a 3 year warranty with full access to tech support in the USA!
MAG LOCK 600LBS
The VISIONIS 600 series electromagnetic locks are
renown with its excellent holding force and the
remarkable features. The series compliance to CE and
PSB Test are manufactured under the highest quality
control to achieve the commitment to customer who
always satisfied with maximum quality and reliability.
SPECIFICATIONS:
SPECIFICATIONS:
- Voltage Input: 12 VDC / 24 VDC
- Current Draw: 12V / 500mA ; 24V / 250mA (±5%)
- Holding Force: Up to 600 lbs (272 kg)
- Hall Effect Contact: SPDT rated 2A at 24 VDC
- Magnetic Contact Rating: 28 VDC, 0.5A, 10W
- Anti-Rust Surface Treatment: Blue Zinc Plating
- Operating Temperature: 0~55° C (32~131° F)
- Operating Humidity: 0~95% (non condensing)
- Weight (Magnet): 1.1 kg (±1%)
- Dimensions: Magnet - (L)250x(W)42x(T)25 mm
- Armature - (L)180x(W)38x(T)11 mm
FEATURES:
- Dual Voltage Selectable (12 VDC or 24 VDC)
- Low Current Consumption
- Reliable Holding Force
- Hall Effect Sensor Monitoring Output
- Green/Red LED Indication for EM Lock Status
- Built-in Mag.Contact for Door Status Monitoring
- Durable and Silence Operation
- Cosmeticize Anodized Aluminum Casing
- Surge & Spike Protection PCB
- Anti-Tamper Jam Nuts
- Compact Size for Small Doors, Cabinets etc.
- Full Range of Optional Brackets
- Anti Residual Magnetism Kick Off Button
WIRELESS 2-CHANNEL RECEIVER
The VISIONIS VIS-8007 RF wireless Receiver was built to feed the demand for a device that can meet multiple functions without having to purchase additional devices. The VIS-8007 RF receiver can be used to control all sorts of Electrical devices such as Garage door Openers, Lights, Motorized gates, Mag locks, Electric Strikes, lifts and many more devices.
SPECIFICATIONS:
Operating Frequency: 315mhz
Number of Codes: 1,048,576
Data Format: PWM
Operating Voltage: +12V 24V
Operating Distance: Up to 320 Feet (100M)
Operating Temperature: 0-70 C or 32 - 158 F
Current Draw: 19mA
Sensitivity: -100DB
Compatible Transmitter: VIS-8008
RF channels: Two
No. of Remotes that are able to connect to one Receiver: Up to 20
Receiver Output: C dry contact (NO/NC/COM)
Receiver Output Functions: 5 (Default) 4 second momentary, 1-sec momentary, toggle, validity, latch
Connectors: 5 screw Terminal (NO, COM, NC + -)
Case Construction: ABS Plastic
Dimensions: 63mm*45mm*30mm, (2.4 Inches* 1.77 Inches*1.18 inches)
Weight: 43g or 1.52 Ounces
Antenna: Wire lead
Mounting Screws: Comes with two mounting screws
Warranty: 1 Year
WIRELESS REMOTES
The model VIS-8008 is a 2-Channel 315 MHz charcoal and silver remote supplied with a quick-disconnect key ring. This transmitter (remote) is designed for use with the VISIONIS VIS-8007 2 channel receiver. This transmitter (remote) has over 1,048,576 codes of programming which makes it virtually impossible of the codes being duplicated. The receiver programs each specific code; no unauthorized person can gain access to the system by reprogramming or duplicating the Transmitter (remote). This transmitter (remote) can be programmed locally into the memory of the receiver (VIS-8007).
SPECIFICATIONS:
Model Number: VIS-8008
Voltage: 12/24V
Frequency: 315 MHz
Current Draw: 10Ma
Number of Buttons: 2
Encoding Type: Fixed
Operating Distance: Up to 320 Feet (100M)
Compatible Receiver: VIS-8007
No. of Remotes that are able to connect to one receiver: Up to 20
LED Transmission: Blue LED light
Includes: 2 pieces of the 3v CR2016
Over 1,048,576 codes
Instructions to program a new Transmitter (remote):
Note: Before you start to program the Transmitter (remote) make sure you have the Receiver ready to be
programmed. You may only use the Visionis Receiver model number VIS-8007.
 Each VIS-8004 Visionis receiver can program up to 20 Transmitters (remotes) (VIS-8008)
 Make sure that while you are programming the transmitter (remote) you have the remote in your hands
ready to be programmed.
 Press the programming switch for 3 seconds or more. The channel’s LED will start to flash quickly. This
will indicate that it is in programming mode.
 When the LED light begins to Flash, Press the button of the Transmitter (remote) to be programmed
one time. The receiver’s Channel light will flash once to show that that the transmitter (remote) has
been programmed successfully. After the transmitter (remote) has been programmed the receiver will
automatically exit the programming
EXIT BUTTON
The VISIONIS Request-to Exit Buttons and Switches offers a variety of options to fit several applications needs.
The VISIONIS line is designed to provide a reliable
source of egress access controlled opening devices in residential, commercial and Industrial locations.
The VISIONIS Request-to Exit Buttons may be connected to the request-to-exit input of any access control device or
directly connected to an electromagnetic lock or Electric strike Device.
SPECIFICATIONS and FEATURES:
• Stainless-steel face-plate.
• "PUSH TO EXIT" & "PRESIONE PARA SALIR" inserts included.
• Fits into standard single-gang box.
• Large round green color push button.
• Five colored, 12-Inch, AWG 18 wire leads
• Degree of Protection: IP-40
• LED: Yes
• LED Life: 20000hours
• Switch Material: Plastic
• Switch Plate Material: Stainless Steel
• Dimension of Mounted Switch: 57 mm or 2.24 Inch
• Dimension of Exit Button: 115L×70W×5H mm or 4.52L×2.75W×0.19H Inch
• Background Color: Green Color + PUSH TO EXIT (Black Word)
• Standard: U. S. A Standard
• NO/NC contact rated 10A@125~250 VAC.
• Illum. S.P.D.T.
SHIPPING:
For domestic orders shipped to all of the United States including Puerto Rico, Alaska and Hawaii. FPC Security offers free USPS Priority mail and UPS services. The package will be received with in 2 to 5 business days.
RETURNS
:
-Qualifying return requests will result in a Return Authorization (RA) number within one business day. You will receive your RA number and instructions on how to complete your return. RA numbers are valid for 15 days.
-Merchandise returned within
60
days of purchase with the appropriate RA number will receive a full product cost refund, provided it is in perfect unused, uninstalled condition in its original undamaged and unmarked packaging. Packages must be complete with all instructions and warranty cards.
-Defective products are replaced or repaired according to the manufacturer’s warranty policy.
-Shipping costs are not refundable, but FPC-Security will pay the USPS MAIL or UPS GROUND freight to ship your exchanges or replacements for defective merchandise. Upgraded air shipping is available at additional cost.